CONFIG_DIGITAL_WELDING_INTERFACE_PROCESS2

This structure defines the secondary process status and monitoring mapping for digital welding interfaces. It focuses on real-time signal exchange between the welding robot and power source, tracking process flow, machine readiness, and current feedback.

BYTE#	Field Name	Data Type	Remarks
0	`_tCurrentFlow`	CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA	Mapping for Current Flow Detection
15	`_tProcessActive`	CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA	Prcoess activation settings
30	`_tMainCurrent`	CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA	Digital feedback for main current settings
45	`_tMachineReady`	CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA	Signal indicating machine ready state settings
60	`_tCommReady`	CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA	Communication readiness flag between robot and welder

Total size: 75 bytes

Defined in: DRFS.h

typedef struct _CONFIG_DIGITAL_WELDING_INTERFACE_PROCESS2
{
    /* Welding current flow detection */
    CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA _tCurrentFlow;

    /* Process active status mapping */
    CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA _tProcessActive;

    /* Main welding current feedback mapping */
    CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA _tMainCurrent;

    /* Machine ready signal mapping */
    CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA _tMachineReady;

    /* Communication readiness signal mapping */
    CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA _tCommReady;

} CONFIG_DIGITAL_WELDING_INTERFACE_PROCESS2, *LPCONFIG_DIGITAL_WELDING_INTERFACE_PROCESS2;

Note

This structure complements CONFIG_DIGITAL_WELDING_INTERFACE_PROCESS by providing extended process monitoring signals.
_tMachineReady ensures proper startup synchronization.
_tCommReady confirms communication between the welding controller and robot system.
Commonly used in digital fieldbus-controlled welding machines (e.g., EtherCAT, ProfiNet).