CONFIG_DIGITAL_WELDING_INTERFACE_MODE

This structure defines the mode configuration mapping for digital welding interfaces. It specifies the digital I/O assignments for various welding operation modes, such as 2T/4T toggle, pulse mode selection, and welding mode option settings.

BYTE#	Field Name	Data Type	Remarks
0	`_tWeldingMode`	CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA	Digital mapping for Welding Mode Selection
15	`_t2T2TSpecial`	CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA	Mapping for 2T/4T Mode or 2T Special signal
30	`_tPulseMode`	CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA	Digital mapping for Pulse Mode Enable
45	`_tWMopt1`	CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA	Digital mapping for Welding Mode Option 1

Total size: 60 bytes

Defined in: DRFS.h

typedef struct _CONFIG_DIGITAL_WELDING_INTERFACE_MODE
{
    /* Welding mode selection mapping */
    CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA _tWeldingMode;

    /* 2T/4T mode or special toggle mapping */
    CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA _t2T2TSpecial;

    /* Pulse mode activation mapping */
    CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA _tPulseMode;

    /* Welding mode option mapping */
    CONFIG_DIGITAL_WELDING_IF_MAPPING_DATA _tWMopt1;

} CONFIG_DIGITAL_WELDING_INTERFACE_MODE, *LPCONFIG_DIGITAL_WELDING_INTERFACE_MODE;

Note

CONFIG_DIGITAL_WELDING_INTERFACE_MODE supports flexible mode selection via digital inputs.
_t2T2TSpecial enables toggle between momentary (2T) and latching (4T) modes.
_tPulseMode activates or deactivates pulsed welding functionality.
Often used together with CONFIG_DIGITAL_WELDING_INTERFACE_PROCESS for a complete digital welding interface configuration.