app_weld_reset_interface

Definition
DRFLEx.h within class CDRFLEx, public section (line 1033)

bool app_weld_reset_interface(unsigned char bReset)
{
    return _app_weld_reset_interface(_rbtCtrl, bReset);
};

Features

This function resets the welding communication interface to its initial state. It clears all EtherNet/IP configuration data, welding condition parameters, and signal mappings previously set using EtherNet/IP interface setup functions.

Use this function when you need to reinitialize or clear all welding interface settings before reconfiguring new digital welding communication conditions.

Arguments
None

Return

Value	Description
0	Error
1	Success

Example

// Reset all EtherNet/IP welding interface configurations
unsigned char bReset = 1;
bool result = Drfl.app_weld_reset_interface(bReset);

if(result)
    printf("Welding interface successfully reset to default state.\n");
else
    printf("Failed to reset welding interface.\n");

This example resets all configured EtherNet/IP welding interface settings, returning the robot controller’s welding communication state to factory defaults.