set_welding_cockpit_setting_time_setting

Definition
DRFLEx.h within class CDRFLEx, public section (line 1053)

void set_welding_cockpit_setting_time_setting(int time)
{
    return _set_welding_cockpit_setting_time_setting(_rbtCtrl, time);
};

Features

This function sets or updates the time configuration value for the welding cockpit. The time parameter defines the duration of the tack welding cycle or interval depending on the active cockpit setting. The input value must be provided in seconds.

This function is typically used when fine-tuning the repetition rate or hold time during welding operations to ensure consistent results in short, repetitive welds or automated sequences.

Arguments

Field	Data Type	Default Value	Description
time	int		Time setting value for the welding cockpit, specified in seconds (s).

Return
None

Example

// Set the welding cockpit time setting to 5 seconds
int time = 5;  // Unit: seconds

// Apply the cockpit time configuration
Drfl.set_welding_cockpit_setting_time_setting(time);

std::cout << "Welding cockpit time set to " << time << " seconds." << std::endl;

In this example, the function adjusts the time parameter of the welding cockpit to 5 seconds. This allows for precise control over the duration of tack welding or timing intervals within a programmed welding sequence.