You're reading the documentation for an older, but still supported version (GL013300).
For information on the latest version, please have a look at GL013301.

ANALOG_WELDING_ADJUST_SETTING

This structure defines real-time adjustment parameters for analog welding control. It allows dynamic tuning of voltage, velocity, and weaving parameters during operation, supporting both preset and on-the-fly updates.

BYTE#	Field Name	Data Type	Value	Remarks
0	_bRealTime	unsigned char	0 or 1	Adjustment mode (0: Preset, 1: Real-time)
1	_bResetFlag	unsigned char	0 or 1	Reset behavior flag 0: Keep current values 1: Apply new setting values
2	_fTargetVol	float		Target voltage (V)
6	_fFeedingVel	float		Wire feeding velocity (mm/s)
10	_fTargetVel	float		Welding travel velocity (mm/s)
14	_fOffsetY	float		Weaving offset along Y-axis (mm)
18	_fOffsetZ	float		Weaving offset along Z-axis (mm)
22	_fWidthRate	float		Weaving width scaling ratio

Total size: 26 bytes

Defined in: DRFS.h

typedef struct _ANALOG_WELDING_ADJUST_SETTING
{
    /* 0: Preset mode, 1: Real-time adjustment */
    unsigned char _bRealTime;

    /* 0: Keep current values, 1: Apply new settings */
    unsigned char _bResetFlag;

    /* Target voltage (V) */
    float _fTargetVol;

    /* Wire feeding velocity (mm/s) */
    float _fFeedingVel;

    /* Welding velocity (mm/s) */
    float _fTargetVel;

    /* Weaving offset along Y-axis (mm) */
    float _fOffsetY;

    /* Weaving offset along Z-axis (mm) */
    float _fOffsetZ;

    /* Weaving width scaling ratio */
    float _fWidthRate;

} ANALOG_WELDING_ADJUST_SETTING, *LPANALOG_WELDING_ADJUST_SETTING;

Note

• Enables real-time process correction during active welding.

• _fFeedingVel can be adjusted to control bead consistency dynamically.

• Commonly used in adaptive welding systems with sensor feedback or vision guidance.