You're reading the documentation for an older, but still supported version (GL013300).
For information on the latest version, please have a look at GL013301.

set_on_monitoring_welding_data

Definition
DRFLEx.h within class CDRFLEx, public section (line 621)

void set_on_monitoring_welding_data(TOnMonitoringWeldingDataCB pCallbackFunc)
{
    _set_on_monitoring_welding_data(_rbtCtrl, pCallbackFunc);
};

Features

This function registers a callback that receives real-time welding monitoring data from the lower-level robot controller. The callback function is invoked automatically whenever new welding information is available, allowing the upper-level application to monitor and process welding parameters such as target voltage, current, and feed speed in real time.

This mechanism is typically used in applications that require welding process monitoring, performance logging, or adaptive control based on live sensor feedback.

Arguments

Field	Data Type	Value	Remarks
pCallbackFunc	TOnMonitoringWeldingDataCB		Function pointer called by the controller to deliver welding status data.

Return
None

Example

// Callback function to handle incoming welding monitoring data
void MyWeldingDataCallback(const LPROBOT_WELDING_DATA pData)
{
    std::cout << "Adj Available : " << static_cast<int>(pData->_bAdjAvail) << std::endl;
    std::cout << "Target Voltage : " << pData->_fTargetVolt << std::endl;
    std::cout << "Target Current : " << pData->_fTargetCur << std::endl;
    std::cout << "Actual Voltage : " << pData->_fActVolt << std::endl;
    std::cout << "Actual Current : " << pData->_fActCur << std::endl;
    std::cout << "Offset Y : " << pData->_fOffsetY << std::endl;
    std::cout << "Offset Z : " << pData->_fOffsetZ << std::endl;
    std::cout << "Gas On : " << static_cast<int>(pData->_bGasOn) << std::endl;
    std::cout << "Wire On : " << static_cast<int>(pData->_bWireOn) << std::endl;
    std::cout << "Teaching Plus : " << static_cast<int>(pData->_bTeachPlus) << std::endl;
    std::cout << "Teaching Minus : " << static_cast<int>(pData->_bTeachMinus) << std::endl;
    std::cout << "Status : " << static_cast<int>(pData->_iStatus) << std::endl;
}

int main()
{
    // Register callback to receive welding monitoring data
    Drfl.set_on_monitoring_welding_data(MyWeldingDataCallback);
    return 0;
}

In this example, MyWeldingDataCallback continuously receives live updates on welding parameters such as voltage, current, and wire feed rate during active welding. This allows integration of real-time process feedback into monitoring dashboards or adaptive control logic.