You're reading the documentation for an older, but still supported version (1.33.4).
For information on the latest version, please have a look at 1.33.5.

ADD_UP

This enumeration specifies the state of the workpiece on the flange, and is defined as follows.

Value	Constant Name	Description
0	ADD_UP_REPLACE	Replace workpiece
1	ADD_UP_ADD	Add workpiece
2	ADD_UP_REMOVE	Remove workpiece

Defined in: DRFC.h

typedef enum{
    ADD_UP_REPLACE = 0,
    ADD_UP_ADD,
    ADD_UP_REMOVE,
} ADD_UP;